3D Printing Services in Prince Edward Island
Prince Edward Island packs a surprising amount of manufacturing into a small province: aerospace at Slemon Park, food and seafood processing, bioscience, and agricultural equipment. We print functional parts on EOS industrial SLS systems at our facility in Mississauga and ship to PEI as domestic freight, with no customs step and no exchange rate on the invoice.
Why operations in PEI order from us:
Domestic freight, no customs or brokerage
Aerospace and food processing grades from one supplier
One hour ahead of us, so quotes land the same day
SLS
EXPERT ENGINERING
SLA
MACHINING & ASSEMBLY
POST PROCESSING
QA / COC
PRINCE EDWARD ISLAND 3D PRINTING AND ADDITIVE MANUFACTURING
The aerospace cluster at Slemon Park in Summerside, food and seafood processing across the island, a growing bioscience sector around Charlottetown, and the agricultural equipment that supports potato and dairy production. For a province this size the industrial mix is unusually technical, and the parts these operations need are rarely stocked anywhere nearby. That is the work our industrial 3D printing services take on.
One Facility, One Set of Parameters
Everything runs on EOS industrial SLS systems and DyeMansion VaporFuse finishing in one building. Nothing is subcontracted, so a fixture ordered for a Summerside line matches the replacement ordered a year later.
Printed in Ontario For
Prince Edward Island!
Request a quote
Selective Laser Sintering for Prince Edward Island
Laser sintered PA12 nylon is what most BC orders leave on. The powder bed supports every feature as it builds, so internal channels, lattices and one piece assemblies print exactly as modelled, and the finished parts are tough enough for sawmill floors, boat decks and mine sites rather than display shelves. Volumes run from a single replacement part through production batches.
Stereolithography for Props and Fine Detail
SLA cures liquid resin with UV light and produces the smoothest surfaces and sharpest detail we offer, which is exactly what Vancouver prop shops, model makers and product design teams need. Resin choice drives what the part can withstand, and our SLA materials guide explains the trade offs.
Replacement Parts and Short Runs
A lot of BC work is not a product launch, it is a machine that needs a part nobody stocks any more. Printing removes tooling from the equation entirely, so a discontinued component can be reproduced from a scan or a drawing, and short runs of a few hundred become economical. Our bridge production page covers the volumes between one off and full production.
Finishing for Damp and Demanding Environments
We machine critical features, fit threaded inserts, bead blast, dye and vapour smooth in house. For marine, food processing and washdown duty, VaporFuse smoothing seals the printed surface so it sheds water instead of holding it.
Industries We Serve in Prince Edward Island
Aerospace maintenance and component work needs light, repeatable parts, covered on our aerospace page. Food and seafood processing needs washdown safe surfaces. Bioscience needs precise fixtures and enclosures. Agricultural operations need replacement components for equipment that has to run through a short season.
Automotive
Consumer Goods
Medical and Dental
Molding
Electronics
Automation & Robotics
Aerospace
Custom Projects
Why a Canadian Supplier Beats an Overseas Portal
An overseas quoting portal looks cheap until the whole schedule is counted: quoting in another time zone, printing somewhere else, customs clearance, an international courier, and a currency conversion at the end. Domestic production removes every one of those steps. Your part is printed in Ontario and shipped as a domestic parcel, engineering questions get answered by someone in your own country, and a revision goes straight back onto the machine instead of into a queue on the other side of the world.
Why Operations in PEI Choose Us
Domestic freight, no border
Shipped as a domestic parcel with no customs clearance, no brokerage fee and no international courier tracking to chase.
Canadian engineering support
Questions answered during your working day by the team that designs and prints the part, not a ticketing system offshore.
No tooling, no minimums
Hundreds of parts, or one replacement component, without moulds, setup charges or minimum order quantities.
Materials for aerospace and food duty
PA12 nylon covers general duty, glass filled and flame retardant grades cover aerospace requirements, and VaporFuse smoothing seals the surface for washdown and food contact environments.
Performance Advantages of SLS 3D Printing
Industrial SLS delivers strong, lightweight, repeatable components for aerospace, food processing, bioscience and agricultural operations across Prince Edward Island.
- Dimensional Accuracy97%
- Weight Reduction88%
- Durability & Stability92%
ACROSS PRINCE EDWARD ISLAND
3D Printing in Charlottetown and Summerside
Charlottetown covers bioscience and general manufacturing, Summerside covers the aerospace cluster at Slemon Park, and processing plants are spread across the island. All of it is printed in Ontario and shipped as domestic freight.
We supply operations including Charlottetown, Summerside, Stratford, Cornwall, Montague and Souris.
Parts are printed at our Mississauga facility and shipped as domestic freight. Transit varies by destination, season and shipment size, so we confirm the delivery date with the quote rather than promise a number that will not hold for every order. Nationwide coverage is on our 3D printing in Canada page.
Our facility: 4100A Sladeview Crescent Unit 4, Mississauga, Ontario L5L 5Z3, 905-581-0630.
Every order for Prince Edward Island is printed here, at our facility in Mississauga, Ontario.
WHY CHOOSE ANUBIS3d?
Canadian production, no customs on the way to PEI.
Aerospace and food safe grades from one supplier.
Fixtures and spares without tooling or minimums.
Where we serve
Canada · Ontario · Toronto · Mississauga · Quebec · British Columbia · Alberta · Manitoba · Saskatchewan · Nova Scotia · New Brunswick · Newfoundland and Labrador · Prince Edward Island · Northern Canada
Explore more
More on how we print, what we print in, and what we have built for manufacturers who order from across Canada.
Send us the part and the quantity from anywhere in Prince Edward Island. We quote from the file and flag anything worth changing before you commit.
F.A.Q.
Do you serve Prince Edward Island from Ontario?
Yes. We print in Mississauga, Ontario and ship to PEI as domestic freight, with no customs step and no currency conversion on the invoice.
How long does shipping to PEI take?
Transit depends on the destination and shipment size, so we confirm the delivery date with the quote. Production time is usually the larger part of the schedule.
Can parts be used in food processing areas?
Raw sintered nylon is porous, so food contact applications use VaporFuse smoothing, which seals the surface and supports (EU) 10/2011 food contact requirements.
Is there a minimum order?
No. We print single parts as readily as production batches, because there is no tooling to amortise across a quantity.
Do you support the aerospace work at Slemon Park?
We supply printed fixtures, handling tools and components to aerospace operations, and our aerospace page covers the applications. Tell us the documentation your programme requires and we will confirm what we can provide before you order.