SLEEK DESIGNS EASY TO INSTALL COBOT FRIENDLY COVERS
Anubis 3D Camera covers, and mounts are designed specifically to cover and protect the FANUC iRVision 2D and 3D family of camera systems. These covers are engineered to be fully collaborative compliant while maintaining access to key functions of the CRX Robot and the iRVision system. Using SLS 3D Printing technology for manufacturing allowed us to design a lightweight cover without adding a big load on the arm. The covers are installed between the robot’s mounting flange and the tool. Reach out to us today to learn more about Anubis 3D SLS printing services and request a quote on your next project.
Because they are engineered for FANUC CRX robots, installation remains simple and collaborative compliance is maintained. At the same time, the low profile design avoids adding unnecessary load to the robot arm.
iRVision
2D Camera Cover and Mount
iRVision
3D Camera Cover and Mount
iRVision
3D Camera Cover with Lens Shutter
BENEFITS
OFFICIAL FANUC ACCESSORIES SUPPLIER
• Fully encloses FANUC iRVision camera components, including power and communication cables
• Maintains easy access to communication ports
• Two piece design allows camera setup and maintenance while mounted on the robot
• Lightweight construction using SLS 3D printing
• 6 Month Limited Warranty Included
• Collaborative compliant design for CRX robots
• Official FANUC CRX accessory supplier
• Designed and manufactured in Canada
IRVISION 2D CAMERA COVER AND MOUNT
Protect your FANUC iRVision 2D sensor from impact, dust, and cable strain without affecting robot motion or accessibility. This lightweight cover installs directly between the robot flange and tool, keeping your vision system safe and fully functional in collaborative environments.
Product Specifications:
Weight: 710 g
Length: 281 mm
Width: 114 mm
Height: 208 mm
Colour: GRAY
Tool Clearance: 158 mm DIA
Compatible Robot: CRX 10iA/L
Compatible iRvision: A05B-1426-B102, A05B-1426-B103 , A05B-1426-B104, A05B-1426-B112, A05B-1426-B114
IRVision 3D Camera Cover and MOUNT
Designed for demanding production environments, this cover protects FANUC iRVision 3D sensors while maintaining full access for setup and maintenance. Available for the full FANUC CRX cobot range, it ensures stable alignment and long term vision performance.
Product Specifications:
Weight: 610 g
Length: 260 mm
Width: 168 mm
Height: 185 mm
Colour: GRAY/WHITE
Tool Clearance: 120 mm DIA
Compatible Robot: CRX 10iA/L, 20iA, 25iA
Compatible iRvision: 3DV/400, 3DV/600
IRVISION 3D CAMERA COVER WITH LENS SHUTTER
Built for dusty, high-debris cells, this cover adds active protection to your FANUC iRVision 3D sensor. Two adjustable air nozzles keep the lens clear while the camera scans, and a pneumatic shutter closes over the sensor when it is idle, protecting it from collisions and debris.
Product Specifications:
Compatible iRVision: 3DV/400, 3DV/600
Air Purge: 2× flat air nozzles, adjustable 35° to 45°
Air Supply: 8 mm tubing
Shutter: Pneumatic, 4 mm tubing
Speed Control: Inline 4 mm flow-control fittings
Position Feedback: 2× proximity sensors (PNP or NPN)
Damping: EPDM foam, open and closed positions
Mounting: 4× M6 threaded inserts, rear face
Camera Cover in Action
See how Anubis 3D camera covers protect FANUC iRVision systems while keeping sensors fully visible for accurate detection. The lightweight structure helps reduce contamination, supports stable alignment, and enables reliable operation in continuous production environments.